This Brink direct fit wiring kit hooks your towbar up to trailer lights on Peugeot 2008, 208, Citroen C3 and C4 Cactus built within the listed dates, using a seven pin socket and model-specific loom lengths so you can tow within factory layouts. The loom tracks the standard rear body path over a couple of metres, keeping it tucked high and away from road grime when you get out there with a loaded trailer.

The gear uses multi-core copper wire with a tough outer sheath and a socket body sized for standard seven pin round plugs, matched to 12 volt lighting circuits on these Peugeot and Citroen platforms. A small control module and buzzer sit near the rear fuse and light area, keeping joins short and tidy. It is a smart buy if you want wiring that suits these bodies without cutting factory cables or guessing wire colours.

• Brink vehicle specific towbar wiring harness kit
• Suits Peugeot 2008 models built 03/2013–12/2018
• Suits Peugeot 208 models built 03/2012–12/2018
• Suits Citroen C3 models built 07/2016–onwards
• Suits Citroen C4 Cactus models built 09/2014–onwards
• Includes seven pin trailer socket and loom
• Includes electronic control module and buzzer
• Sheathed multi-core cabling for trailer lighting
• Hardware, fuses, connectors and decals supplied
• Printed wiring kit instructions included in box

Q: Does this wiring harness include a trailer socket?

Yes, the kit includes a seven pin trailer socket matched to the supplied loom. The socket mounts near the towbar so standard seven pin round trailer plugs can connect. This keeps lighting and indicator functions centralised at the hitch. The socket body is part of the overall Brink wiring setup.

Q: Is this harness suitable for all Peugeot and Citroen models?

No, it only suits the specific Peugeot 2008 and 208, Citroen C3 and C4 Cactus models listed in the fitment information. Each loom is cut for those bodies and connector layouts. Using it on unlisted vehicles can lead to cable length issues. Always match your build month and model before ordering.

Q: Does the kit come with installation instructions?

Yes, the kit includes a printed instruction booklet. The booklet outlines connection points and component placement for the supported vehicles. Following those steps helps keep the loom routed safely inside the vehicle. Many owners still choose an auto electrician for the actual install.

Q: What towing functions does this harness support?

The harness is intended for standard trailer lighting functions. That typically covers indicators, brake lights, tail lights and number plate lighting through the seven pin socket. The included buzzer provides audible feedback when the trailer indicators operate. This setup suits everyday towing needs for small to medium trailers.

• Direct fit wiring harness for factory-correct towbar wiring
• Suits Peugeot 2008 models built from March 2013 to December 2018
• Suits Peugeot 208 models built from March 2012 to December 2018
• Suits Citroen C3 models built from July 2016 onwards
• Suits Citroen C4 Cactus models built from September 2014 onwards
• Harness routes from rear of vehicle to trailer socket location
• Installation requires access to rear interior trim and tail light area
• Kit is intended to integrate with vehicle electrical system using dedicated connectors
• Professional installation is recommended for correct operation