This Brink direct fit wiring kit hooks your towbar up to trailer lights on Range Rover Velar and Jaguar XE, XF and F-PACE built from 2017, so indicators, brakes and tails match the vehicle each time you head off. The harness is cut to length for these platforms, so it runs along factory paths without extra slack to snag when you load up gear in the rear.

The kit brings a vehicle-specific loom, control module, trailer socket and mounting hardware, so you get a matched setup instead of piecing bits together. Brink gears this for late-model body electronics, so trailer lighting loads sit where the car expects them and dash warnings stay in check. That makes it a smart buy if you want wiring that suits Aussie highway runs, wet coastal weekends and dusty inland tracks.

• Brink direct fit vehicle specific wiring harness
• Suits Range Rover Velar from 03/2017 onwards
• Suits Jaguar XE from 06/2017 to 05/2019
• Suits Jaguar XF from 06/2017 onwards
• Suits Jaguar F-PACE from 06/2017 to 12/2020
• Complete kit with harness loom and socket
• Includes control module and mounting hardware
• Vehicle specific lengths for factory style routing
• Intended for towbar trailer lighting connection
• Suitable for 4x4 and touring towing setups

Q: Does this wiring kit include the trailer socket?

Yes, the kit includes a trailer socket and mounting base. You get the socket, cover and backing plate sized for standard towbar mounting holes, along with screws and nuts. That means you do not need to source a separate socket for basic trailer lighting. Just follow the instructions and mount it to the towbar plate.

Q: Is this harness universal or model-specific?

This harness is model-specific for the listed Land Rover and Jaguar vehicles. The loom length and connector layout match those platforms rather than generic wiring. That helps keep routing neat behind trims and reduces the need for cutting or extending wires. Always check your vehicle build date against the listed ranges before ordering.

Q: Can I use this kit on earlier or later build dates than listed?

No, it is intended only for the stated build ranges. Vehicle wiring and control modules can change between years even when the body looks similar. Using a harness outside its listed range can lead to inoperative lights or warning messages. Always match the VIN build date to the supported period shown for each model.

Q: Does the kit come with installation instructions?

Yes, a printed instruction sheet is supplied in the box. The guide shows connection points, routing paths and mounting positions specific to the supported models. Take your time reading it fully before starting work. If you are unsure at any point, talk with an auto electrician or workshop that knows towbar wiring.

Suitable for Land Rover Range Rover Velar built from 03/2017 onwards.

Suitable for Jaguar XE built from 06/2017 to 05/2019.

Suitable for Jaguar XF built from 06/2017 onwards.

Suitable for Jaguar F-PACE built from 06/2017 to 12/2020.

Kit is intended for towbar trailer wiring connection on listed vehicles only.

Installation follows the supplied Brink wiring kit instructions.