This LV Automotive braided expandable sleeving in 6 mm diameter and 12 m length keeps stray wiring under control so you can get out there without loose cables snagging. The expandable braid stretches to slide over plugs a few millimetres wider than 6 mm, then pulls back tight over the run. That makes it handy for fresh dual‑battery setups or tidying older harnesses along a 12 m route. The black braided sheath uses a tightly woven synthetic material that stands up to heat and scuffs found in Aussie engine bays and ute trays across tens of thousands of kilometres. A full 12 m roll gives enough coverage for several smaller projects, from canopy lighting looms under 6 mm to trailer wiring runs of similar size. It is smart buy gear for anyone who wants neat, protected cabling without changing connectors.

• LV Automotive braided expandable cable sleeving
• Nominal internal diameter of 6 mm
• Supplied in a 12 m continuous length
• Black colour to blend with existing looms
• Suits general electrical wiring protection applications
• Expandable braid to pass over small connectors
• Helps organise and bundle small cable groups
• Ideal for automotive, trailer, and canopy wiring
• Roll format for convenient storage and dispensing
• Part number LV3371 for easy reordering

Q: Can I cut the 12 m LV Automotive braided expandable sleeving into shorter lengths?

Yes, the 12 m sleeving roll can be cut to suit individual wiring runs. Use sharp side cutters or scissors to avoid frayed ends. Many auto sparkies finish each cut with heatshrink or tape over the last 10–20 mm to hold the braid. This approach lets one roll cover several smaller projects around the vehicle.

Q: What cable size works best with the 6 mm braided sleeving?

The 6 mm sleeving suits small wiring bundles with an overall diameter close to 6 mm. The braided construction expands to slip over slightly larger sections then contracts back around the loom. This makes it practical for light‑duty 12V accessories, sensor leads, and canopy lighting runs without needing to strip off every connector.

Q: Is this sleeving suitable for use on trailers or camper wiring?

Yes, this 6 mm by 12 m braided sleeving is well suited to tidy and protect smaller trailer or camper looms. The long length can cover runs along drawbars or chassis rails. The black braid helps keep wiring unobtrusive underneath the frame. Many users run it over existing cable where there is risk of rubbing on metal edges.

Q: How should I secure the ends of the braided expandable sleeving?

The ends are typically secured with tape, cable ties, or short pieces of heatshrink over the last 10–20 mm. This stops the braid from opening and keeps the sleeve tight on the loom. Heatshrink sized just over 6 mm gives a tidy finish near plugs and junctions. Simple ties spaced every few hundred millimetres then hold the sleeved loom in place.