The Tycab Black 6 B&S Single Core cable is the sort of gear you run for main 12V lines that pull up to 125 amp. The 6 B and S size with 168 strands at 0.32 millimetre keeps voltage drop in check over longer runs. The insulation rating of 90 degree Celsius suits battery boxes near engines or compressors that run for hours. The black sheath keeps polarity clear in mixed colour looms. The conductor uses fine stranded copper so the cable can snake through canopies and under ute trays without fighting every bend. The 125 amp rating lines up with common DC chargers and mid sized inverters in touring setups. The cable comes sold per metre so you only pay for the length you actually run. The 6 B and S spec matches standard auto electrical gear on most aftermarket installs.

• Tycab black 6 B&S single core cable
• Sold per metre for custom lengths
• Suits high current 12V applications
• Rated up to 125 amp current
• 168 fine copper strands per conductor
• Individual strand diameter 0.32 mm
• Insulation temperature rating 90 °C
• Flexible construction for tight routing
• Black sheath ideal for negative runs
• Referenced 100 m roll length in data

Q: Is this Tycab 6 B&S cable suitable for 12V automotive systems?

Yes, this Tycab 6 B&S single core cable is suitable for 12V automotive and touring systems within its 125A rating. Auto electricians commonly use 6 B&S for main battery feeds, DC chargers and similar loads. The fine stranded copper handles vibration in vehicles. The 90°C insulation rating suits typical engine bay and canopy temperatures.

Q: Can I buy this cable in a specific length?

Yes, this cable is sold per metre so you can order the exact length you need. Just enter the total metres as the quantity in your cart. A single order is supplied as one continuous length where possible. That makes routing along chassis rails or through conduit much simpler.

Q: What does 6 B&S actually mean for sizing?

6 B&S refers to a common automotive cable size that balances current capacity and flexibility. In this case it is paired with a 125A current rating for guidance on load. The spec also aligns with lugs, circuit protection and accessories labelled 6 B&S. Using matching sizes keeps terminations consistent across your setup.

Q: Is the black insulation suitable for negative runs?

Yes, the black sheath is typically used to indicate negative or earth runs in 12V systems. Keeping black cable for negative and red for positive helps fault finding later. Many auto electricians follow this colour convention on dual battery and canopy builds. It also keeps your wiring layout tidy and clear for future work.