Tycab Black 3mm Single Core cable on a 30m spool gives you enough run for most 12 volt jobs around a ute canopy or camper fitout. The 3mm conductor and 10 amp rating line up well with light circuits, USB sockets and small pumps without wasting space. The black sheath across the full 30m suits negative or accessory feeds when you want a clean, consistent wiring layout. Inside the sheath you get 14 strands at 0.32mm each, so the copper stays flexible enough to route through drawers, panels and conduit. The insulation is rated to 90 degrees Celsius, which makes sense for Aussie engine bays and hot canopies. The single core format keeps fault‑finding simple when you are chasing issues on the road. For anyone building a basic 12 volt setup, this is smart buy cable that just does the job.

  • Black 3mm single core low voltage cable
  • Supplied in a 30m spooled length
  • Rated for 10 amp electrical circuits
  • Conductor built from 14 strands @ 0.32mm
  • Insulation temperature rating up to 90°C
  • Suitable for 12V automotive and trailer wiring
  • Flexible stranded copper core for easier routing
  • Single core layout keeps fault finding straightforward
  • Black sheath helps identify negative or accessory runs
  • Long spool length reduces joins and voltage drop points

Q: Can I cut the 30m spool into shorter lengths?

Yes, the 30m cable can be cut into shorter lengths as needed. Use a proper cable cutter to avoid deforming the copper strands. After cutting, strip only enough insulation for your terminal or join. Always use suitable crimp terminals or junction blocks for each new length. Protect all joins with heat shrink or junction covers.

Q: Is this cable suitable for under-bonnet routing?

Yes, the cable insulation is rated to 90°C, which suits typical under-bonnet temperatures. Route the cable away from direct exhaust heat and moving parts. Use conduit and clamps to support the run along factory looms. Regularly inspect the sheath in high heat areas during servicing.

Q: What type of terminals should I use with 3mm single core?

Use terminals sized specifically for 3mm or the matching cross-sectional area. Correctly sized terminals grip all 14 strands of the 0.32mm conductors. Crimp with a quality ratchet crimper to avoid loose joints. Tug-test every crimp before final wrapping or installing.

Q: Can this cable be used in marine 12V systems?

Yes, it can be used in 12V marine circuits where 3mm, 10A cable is appropriate. Keep all runs above bilge water and out of constant moisture. Use tinned terminals and heat shrink to help manage corrosion. Run the cable in conduit or loom tubing where it may rub on fibreglass or metal edges.

  • 30m length suits full canopy runs
  • 3mm core handles typical 10A loads
  • Stranded copper core stays flexible
  • 90°C insulation suits Aussie heat
  • Black sheath keeps looms tidy
  • Reliable gear for 12V touring
  • Conductor size: 3 mm single core
  • Cable length: 30 m spooled
  • Current rating: 10 A
  • Maximum operating temperature: 90 °C
  • Conductor construction: 14 strands @ 0.32 mm each
  • Sheath colour: black

Black 3mm single core electrical cable 30 m spooled length.

SKU CB003A1-030BK
Barcode # OEBC536973
Brand Tycab
Shipping Weight 0.4200kg

Black 3mm Single Core 30M (Spooled Length)

SKU: CB003A1-030BK
Sale price
$21.99 MATES’ PRICE
Earn 210 PTS on this item. Login or Join Free
GEAR'd Logo
Dispatch in 7 days
Sale price
$21.99 MATES’ PRICE
PayPal Checkout
4 payments of $5.50

afterpay More info.

Make 4 payments of $5.50 over 8 weeks and get it now!

zipMoney
From $10 / week
Afterpay
4 payments of $5.50
Humm
Black 3Mm Single Core 30M 10 Amp Rating 90 Deg 14 Strands @ 0.32Mm

Calculate Shipping

Tycab Black 3mm Single Core cable on a 30m spool gives you enough run for most 12 volt jobs around a ute canopy or camper fitout. The 3mm conductor and 10 amp rating line up well with light circuits, USB sockets and small pumps without wasting space. The black sheath across the full 30m suits negative or accessory feeds when you want a clean, consistent wiring layout. Inside the sheath you get 14 strands at 0.32mm each, so the copper stays flexible enough to route through drawers, panels and conduit. The insulation is rated to 90 degrees Celsius, which makes sense for Aussie engine bays and hot canopies. The single core format keeps fault‑finding simple when you are chasing issues on the road. For anyone building a basic 12 volt setup, this is smart buy cable that just does the job.

  • Black 3mm single core low voltage cable
  • Supplied in a 30m spooled length
  • Rated for 10 amp electrical circuits
  • Conductor built from 14 strands @ 0.32mm
  • Insulation temperature rating up to 90°C
  • Suitable for 12V automotive and trailer wiring
  • Flexible stranded copper core for easier routing
  • Single core layout keeps fault finding straightforward
  • Black sheath helps identify negative or accessory runs
  • Long spool length reduces joins and voltage drop points

Q: Can I cut the 30m spool into shorter lengths?

Yes, the 30m cable can be cut into shorter lengths as needed. Use a proper cable cutter to avoid deforming the copper strands. After cutting, strip only enough insulation for your terminal or join. Always use suitable crimp terminals or junction blocks for each new length. Protect all joins with heat shrink or junction covers.

Q: Is this cable suitable for under-bonnet routing?

Yes, the cable insulation is rated to 90°C, which suits typical under-bonnet temperatures. Route the cable away from direct exhaust heat and moving parts. Use conduit and clamps to support the run along factory looms. Regularly inspect the sheath in high heat areas during servicing.

Q: What type of terminals should I use with 3mm single core?

Use terminals sized specifically for 3mm or the matching cross-sectional area. Correctly sized terminals grip all 14 strands of the 0.32mm conductors. Crimp with a quality ratchet crimper to avoid loose joints. Tug-test every crimp before final wrapping or installing.

Q: Can this cable be used in marine 12V systems?

Yes, it can be used in 12V marine circuits where 3mm, 10A cable is appropriate. Keep all runs above bilge water and out of constant moisture. Use tinned terminals and heat shrink to help manage corrosion. Run the cable in conduit or loom tubing where it may rub on fibreglass or metal edges.

  • 30m length suits full canopy runs
  • 3mm core handles typical 10A loads
  • Stranded copper core stays flexible
  • 90°C insulation suits Aussie heat
  • Black sheath keeps looms tidy
  • Reliable gear for 12V touring
  • Conductor size: 3 mm single core
  • Cable length: 30 m spooled
  • Current rating: 10 A
  • Maximum operating temperature: 90 °C
  • Conductor construction: 14 strands @ 0.32 mm each
  • Sheath colour: black

Black 3mm single core electrical cable 30 m spooled length.

SKU CB003A1-030BK
Barcode # OEBC536973
Brand Tycab
Shipping Weight 0.4200kg