The Axis SO239 Antenna Mount gives you a simple way to bolt an SO239 antenna base onto the vehicle and run a 4.5 m lead back to the radio without cutting and crimping your own coax. The AT7513 base and SO239 thread match standard UHF and VHF antenna hardware, so you can swap whips or bases that share the same 50 Ω interface and keep your setup tidy across different trips.

The 4.5 m coaxial kit with FME1 fitted lets you snake the cable through tight spots and small millimetre-size holes in firewalls or body panels. The metal mount body provides a firm mechanical anchor for the antenna and helps maintain consistent electrical contact where the panel thickness is only a few millimetres. For anyone wiring up radios on tourers or work utes, this Axis mount is a smart buy that keeps the install straightforward and reliable.

• Axis SO239 antenna mount assembly
• Includes AT7513 antenna base
• Supplied with 4.5 m coaxial cable
• Cable terminated with FME1 connector
• SO239 thread suits common radio antennas
• Mount intended for metal panel installation
• Compact form suits guards and brackets
• Single kit links mount base and cable
• Ideal for UHF or VHF mobile radio setups
• Brand: Axis

Q: Does the Axis SO239 Antenna Mount come with the coaxial cable included?

Yes, this mount is supplied with a 4.5 m coaxial cable kit with an FME1 connector already fitted. That means you do not need to buy a separate cable for the initial install. The 4.5 m length suits most vehicle layouts where the antenna is on a guard or bar and the radio is inside the cab. The pre-fitted FME1 end also saves time on termination work.

Q: What connector type is used at the antenna end of this mount?

The mount uses a standard SO239 threaded interface at the antenna end. This suits many UHF and VHF antenna bases that share the same thread pattern. You simply screw the matching antenna or base onto the SO239 fitting. This makes it straightforward to upgrade or change antennas later as long as they match the SO239 standard.

Q: Is the Axis SO239 Antenna Mount suitable for use on metal body panels?

Yes, this mount is intended to be installed through metal body panels or brackets. The AT7513 base provides the mechanical clamping needed to secure the mount firmly. A solid metal mounting surface helps provide a good ground reference for radio performance. Always ensure the mounting hole is drilled to the correct diameter for the base hardware.

Q: What type of radio setups typically use an SO239 antenna mount like this?

SO239 mounts are commonly used with mobile UHF CB and some VHF radios. Many whip and base antennas in these ranges are built around the SO239 and PL259 pairing. This Axis kit gives you the mount, the base, and a 4.5 m cable in one package. That makes it well suited to new installations or tidy refits of existing radio gear.