The Oceansouth Honda cowling storage cover fits BF115 BF135 and BF150 four cylinder 2.3L outboards from 2010 on. The cover drops over the top cowling to keep dust and overspray off when the boat sits on the trailer or at the jetty. The fabric weight of 340 g/m2 gives decent body so wind does not whip it around the motor. The fit targets Honda factory cowling lines so you are not fighting loose corners. The cover uses 100 percent high tech polyester rated to UPF 50 plus with test values above UPF 80. That rating matters when the motor sits in full sun for six or more hours on a summer day. The 340 g/m2 cloth feels solid in the hands yet still folds flat into a side locker. You get a smart buy for anyone keen to keep Honda paintwork tidy without adding heavy hard covers.

• Oceansouth Honda cowling storage cover for BF115 BF135 BF150
• Suits 4-cylinder 2.3L Honda outboards from 2010 onwards
• Tailored shape matches factory Honda cowling profile
• 340 g/m2 fabric weight for solid protection
• Manufactured from 100% high tech polyester material
• UV protection factor rated at UPF 50+ (measured > UPF 80)
• Intended for use when engine is not running or in storage
• Helps reduce UV fade and surface grime on cowling paint
• Lightweight cover folds compactly for locker or garage storage
• Neutral colour complements standard Honda outboard finishes

Q: Can I leave this Honda cowling storage cover on the motor while running the engine?

No, this cover is intended for storage use only. Running the engine with the cover on can restrict airflow around the cowling. Heat build-up may damage engine components or the cover material. For on-water use, remove the storage cover before starting the motor.

Q: Will this cover fit earlier Honda BF115 BF135 or BF150 models built before 2010?

The cover is specified for Honda BF115 BF135 and BF150 4-cylinder 2.3L outboards from 2010 onwards. Earlier models may have different cowling shapes and dimensions. For best fit and protection, match the cover only to the listed 2010 and later engines.

Q: How should I clean the 100% high tech polyester fabric?

Clean the cover with fresh water and mild soap. Avoid harsh solvents or bleach as they can affect the polyester fibres and UV coating. Rinse well to remove salt and detergent, then allow the cover to air dry fully before storage.

Q: Is the cover suitable for long-term outdoor storage near the coast?

The 340 g/m2 polyester fabric with UPF 50+ is suited to outdoor use around coastal environments. Regular rinsing with fresh water will help remove salt crystals from the surface. Allowing the cover to dry properly between uses will support a longer service life on boats stored beside the ocean.

This Oceansouth cowling storage cover fits Honda BF115 BF135 and BF150 4-cylinder 2.3L outboard engines from 2010 onwards. The cover is shaped for the standard Honda engine cowling profile for these models. Fitment is specific to these three Honda outboard powerheads and is intended for use when the engine is not running or is in storage. No additional brackets or accessories are listed as required for fitment.