If you run twin gas bottles on the drawbar, the Coast to Coast 8mm S/S Flexible Hose 600mm keeps the setup tidy and practical by linking both cylinders into one pigtail run using avalanche valve and inverted flare ends sized for standard LPG hardware. The 600mm length gives you enough reach to hook around brackets without kinking, while the 8mm bore suits normal cooking and hot water loads.

The stainless steel outer on this hose is built tough for life on the A‑frame, handling road grit and contact with steel bottle guards over its full 600mm length. An 8mm internal size keeps gas flow steady without overdoing hose bulk around the regulator. Avalanche valve x inverted flare fittings match common caravan gas gear, so you get solid value from a hose that fits neatly into standard double bottle layouts.

• 8mm stainless steel flexible gas hose
• 600mm overall hose length
• Suits double gas bottle kits
• Ideal for caravan and RV LPG setups
• Stainless braid provides abrasion resistance
• Flexible body helps prevent sharp kinks
• Avalanche valve x inverted flare fittings
• Fits pigtail layouts to twin cylinders
• Compact size suits A‑frame bottle trays
• Coast to Coast branded gas bottle hose

Q: Can this hose be used with single gas bottle setups?

Yes, it can be used with a single bottle if the fittings match. Many caravans use the same 8mm stainless hose style for either one or two cylinders, as long as the avalanche valve and inverted flare connections suit the existing regulator and valves. A licensed gas fitter should confirm compatibility. They can adapt the layout if different end fittings are required.

Q: Does the 600mm length allow for routing around a standard drawbar gas tray?

In most cases, yes, the 600mm length is suitable. The flexible stainless construction lets the hose curve around bottle guards and brackets without sharp kinks. This length helps keep the regulator close to the cylinders while still allowing room for turning the valves. Installers can position the hose to avoid rubbing on sharp edges.

Q: What type of gas is this 8mm hose typically used with?

This style of hose is typically used with LPG systems. Caravan and RV setups commonly run propane or LPG mixes through 8mm stainless braided lines. The fittings on this hose suit LPG regulators and valves used on twin cylinder kits. A licensed gas fitter will select matching components for the gas type in use.

Q: Should this flexible hose be installed by a professional?

Yes, installation should be done by a licensed gas fitter. Gas work on caravans and RVs must meet Australian standards, and using a qualified installer helps ensure joints are correctly sealed and supported. The fitter will check that the avalanche valve and inverted flare connections match the existing system. They can also route and clamp the 600mm hose to minimise vibration and wear.

• Intended for use in double gas bottle kits on caravans and RVs
• Suits pigtail setups connecting two gas cylinders to a regulator or manifold using avalanche valve x inverted flare fittings
• Installation and connection must be completed by a licensed gas fitter in accordance with Australian gas regulations and relevant standards