The Coast to Coast 8mm S/S Flexible Hose 450mm links two LPG bottles over a short 450 mm span so your gas setup stays tidy on the drawbar. The 8 mm internal size suits standard caravan gas layouts where you want consistent flow without bulky copper bends. An Avalanche valve with inverted flare thread connects straight into matching fittings so you can swap bottles and keep the kit simple on the road.
The hose uses stainless steel braid across the full 450 mm length which handles stone spray and weather around the A-frame. The braided body sits at roughly 8 mm width so it routes cleanly past brackets and regulators. Brass hardware at each end pairs with the Avalanche valve and inverted flare interface for a tight metal-to-metal seal. If you want gas gear built tough for Aussie touring this line is a smart buy.
- Suitable hose for double bottle gas kits
- Stainless steel flexible braided construction
- Hose length specified as 450 mm
- Hose size specified as 8 mm
- Includes Avalanche valve x inverted flare fitting
- Compact run helps reduce hose clutter
- Suits caravan and RV gas applications
- Part of gas hoses and pigtails range
- Works with double gas cylinder pigtail setups
- Brand: Coast to Coast
Q: Can this hose be used as a general-purpose water or air hose?
No, this hose is for gas use in double bottle kits. The construction and fittings are selected for LPG style gas systems, not for water or compressed air. Using it with other media can affect performance and compliance. Stick to LPG applications in caravan or RV gas setups.
Q: What is the total length of the hose from end to end?
The hose length is 450 mm. This measurement refers to the hose section specified in the listing. The compact 450 mm run suits close bottle spacing on a drawbar. It helps keep loops tidy inside gas compartments.
Q: What size is the hose opening?
The hose has an 8 mm size. This internal dimension matches common caravan LPG pigtail specifications. The 8 mm bore supports typical appliance and regulator flow rates. It also helps keep pressure behaviour predictable across the gas system.
Q: What material is used for the flexible section?
The flexible section is stainless steel. The stainless braid offers good resistance to corrosion from road grime and weather. It also helps protect the inner hose from knocks and abrasion. This makes it suitable for exposed positions on caravans and RVs.
- Application: connection between double gas bottle kits and associated fittings in caravan and RV setups
- Compatibility: pigtail to suit double gas cylinders using Avalanche valve x inverted flare fittings
- Installation location: gas system area near double bottle mounting point on caravan or RV
- Usage: part of gas hose and pigtail assembly for bottle-to-regulator connection
- Stainless hose made to last touring
- 450mm run suits double bottle kits
- 8mm size matches common LPG lines
- Avalanche valve fits inverted flare gear
- Solid gas hose for coast to campsite
- Hose type: gas bottle hose suitable for double bottle kits
- Hose material: stainless steel
- Hose length: 450 mm
- Hose width / nominal internal size: 8 mm
- Fittings: Avalanche valve x inverted flare
- Application category: caravan and RV gas fittings and accessories
- Sub-category: pigtail to suit double cylinders
- 1 x Coast to Coast 8mm stainless steel flexible hose 450 mm length
- Avalanche valve with inverted flare fitting attached to hose
| SKU | 550-00336 |
|---|---|
| Barcode # | 550-00336 |
| Brand | Coast to Coast |
| Shipping Weight | 0.5000kg |
More infoMake 4 payments of $7.25 over 8 weeks and get it now!
Calculate Shipping
The Coast to Coast 8mm S/S Flexible Hose 450mm links two LPG bottles over a short 450 mm span so your gas setup stays tidy on the drawbar. The 8 mm internal size suits standard caravan gas layouts where you want consistent flow without bulky copper bends. An Avalanche valve with inverted flare thread connects straight into matching fittings so you can swap bottles and keep the kit simple on the road.
The hose uses stainless steel braid across the full 450 mm length which handles stone spray and weather around the A-frame. The braided body sits at roughly 8 mm width so it routes cleanly past brackets and regulators. Brass hardware at each end pairs with the Avalanche valve and inverted flare interface for a tight metal-to-metal seal. If you want gas gear built tough for Aussie touring this line is a smart buy.
- Suitable hose for double bottle gas kits
- Stainless steel flexible braided construction
- Hose length specified as 450 mm
- Hose size specified as 8 mm
- Includes Avalanche valve x inverted flare fitting
- Compact run helps reduce hose clutter
- Suits caravan and RV gas applications
- Part of gas hoses and pigtails range
- Works with double gas cylinder pigtail setups
- Brand: Coast to Coast
Q: Can this hose be used as a general-purpose water or air hose?
No, this hose is for gas use in double bottle kits. The construction and fittings are selected for LPG style gas systems, not for water or compressed air. Using it with other media can affect performance and compliance. Stick to LPG applications in caravan or RV gas setups.
Q: What is the total length of the hose from end to end?
The hose length is 450 mm. This measurement refers to the hose section specified in the listing. The compact 450 mm run suits close bottle spacing on a drawbar. It helps keep loops tidy inside gas compartments.
Q: What size is the hose opening?
The hose has an 8 mm size. This internal dimension matches common caravan LPG pigtail specifications. The 8 mm bore supports typical appliance and regulator flow rates. It also helps keep pressure behaviour predictable across the gas system.
Q: What material is used for the flexible section?
The flexible section is stainless steel. The stainless braid offers good resistance to corrosion from road grime and weather. It also helps protect the inner hose from knocks and abrasion. This makes it suitable for exposed positions on caravans and RVs.
- Application: connection between double gas bottle kits and associated fittings in caravan and RV setups
- Compatibility: pigtail to suit double gas cylinders using Avalanche valve x inverted flare fittings
- Installation location: gas system area near double bottle mounting point on caravan or RV
- Usage: part of gas hose and pigtail assembly for bottle-to-regulator connection
- Stainless hose made to last touring
- 450mm run suits double bottle kits
- 8mm size matches common LPG lines
- Avalanche valve fits inverted flare gear
- Solid gas hose for coast to campsite
- Hose type: gas bottle hose suitable for double bottle kits
- Hose material: stainless steel
- Hose length: 450 mm
- Hose width / nominal internal size: 8 mm
- Fittings: Avalanche valve x inverted flare
- Application category: caravan and RV gas fittings and accessories
- Sub-category: pigtail to suit double cylinders
- 1 x Coast to Coast 8mm stainless steel flexible hose 450 mm length
- Avalanche valve with inverted flare fitting attached to hose
| SKU | 550-00336 |
|---|---|
| Barcode # | 550-00336 |
| Brand | Coast to Coast |
| Shipping Weight | 0.5000kg |
