The Sam Allen 2 Pin Connector gives you a simple way to hook 12V or 24V gear to the dash or deck without loose fly leads. The plug and socket pair carry two contacts so you can run a straight positive and negative feed to lights or accessories. The screw apart design means you twist the body to separate the plug from the panel mount when you pack the boat away. The shell runs chrome plated brass so it can sit near saltwater and still hold up across plenty of trips. The 2 pin layout suits standard low voltage cable and keeps the footprint small on crowded consoles. The waterproof build helps stop spray from reaching the contacts and cuts down on green corrosion. The mounting flange takes simple hardware so you can bolt it to a flat panel and get out there with tidy wiring.

• Sam Allen 2 pin electrical connector
• Rated for use on 12V and 24V systems
• Chrome plated brass construction for durability
• Waterproof screw apart plug and socket set
• Plug features two solid electrical pins
• Panel mount socket with protective flip cover
• Suits low voltage marine lighting and accessories
• Compact design for tight helm and deck spaces
• Simple two conductor positive and negative layout
• Ideal for tidy removable accessory connections

Q: Can this connector be used on both 12V and 24V systems?

Yes, this connector is rated for 12V and 24V systems. That means you can match it with most small boat electrical setups running either voltage. It suits accessories like lights or small loads within the wiring limits. Always size your cable and fuse to the current draw of the gear you are running.

Q: Is the connector suitable for exposed deck mounting on a boat?

Yes, the connector is waterproof and suits exposed deck mounting. The chrome plated brass body and sealing design help protect the contacts from spray and washdown. The flip cover over the socket adds another barrier when the plug is out. Good mounting with sealant around the flange will further reduce water ingress.

Q: How many conductors can I run through this connector?

This connector supports two conductors only. The pins give you one positive and one negative path which is ideal for simple low voltage circuits. If you need extra circuits you will need additional connectors. Keep each connector matched to a single fused circuit for neat fault finding.

Q: Do I need special tools to disconnect the plug from the socket?

No, the screw apart design lets you disconnect the plug by hand. You twist the plug body to release it from the panel socket. This is handy when you remove portable gear like lights or pumps. Regular checks and a light clean will keep the thread working smoothly.

• Suitable for 12V and 24V marine electrical systems
• Fits 2 core cable matched to system load and regulations
• Mount socket to flat panel surface on boat or trailer
• Use for low voltage accessory connections requiring 2 conductors