The Ledlenser 18650 battery 3.6 V / 3000mAh drops straight into your P6R, MH10 or P7R so you can get out there without juggling odd sizes. The 18650 format and 3.7 V rating line up with ML6 lanterns and headlamps like H8R and NEO10R, so one spare battery can back up several bits of gear on the same trip. The 3000 mAh capacity keeps beams useful for camp duties and late pack-downs.

This Li-ion cell runs at a nominal 3.7 V to match Ledlenser driver electronics in P6R Work, P6R Signature and P6R Core QC models. The 3000 mAh storage gives enough runtime for night hikes, roadside jobs and general camp use in typical Aussie heat. The 18650 size fits snug in M7RX, X7R, MT10 and iH11R housings, which makes this battery a smart buy if you want one standard power source across your Ledlenser setup.

• Genuine Ledlenser 18650 Li-ion rechargeable battery
• Nominal voltage rated at 3.7V
• Capacity of 3000mAh for extended runtime
• Standard 18650 size for compatible housings
• Suits P6R Core, Work and Signature models
• Compatible with ML6 Warm Light and ML6 Connect WL lanterns
• Fits MH10, H8R, P7R and NEO10R headlamps
• Also works with M7RX, X7R, MT10 and iH11R lights
• Ideal as a spare or direct replacement cell
• Supports one-battery standard across multiple Ledlenser lights

Q: Is this battery only for headlamps?

No, this battery suits both headlamps and lanterns listed as compatible. It works in models like the ML6 Warm Light and ML6 Connect WL as well as headlamps such as MH10 and NEO10R. That means you can standardise spares across different bits of lighting gear. Just check your light model against the compatibility list before buying.

Q: Can I mix this battery with other 18650 brands in the same light?

No, you should use matching cells of the same type and capacity where more than one battery is required. Mixed brands or capacities can charge and discharge unevenly. That can shorten battery life or stress the electronics. Stick to the same model in multi-cell lights for best performance.

Q: Does this battery arrive pre-charged?

The battery may hold a partial charge from the factory, but it should be fully charged before first use. Charging it to 100% in a compatible Ledlenser light or charger helps balance the cell. This also confirms your charger and light are working correctly. It is good practice after storage or long shipping times.

Q: How should I store this 18650 battery between trips?

Store the battery in a cool, dry place and avoid leaving it in a hot vehicle. A partial charge is usually better for long storage than completely flat. Remove it from the light if you will not use the gear for several months. This helps protect both the cell and your torch contacts.

Suitable for Ledlenser P6R Core, P6R Work, P6R Signature, P6R Core QC, ML6 Warm Light, ML6 Connect WL, iH11R, M7RX, X7R, MT10, MH10, H8R, P7R and NEO10R headlamps and lights.