This LV Automotive 15mm stainless cable clamp kit keeps 15 mm looms in place along guards, chassis rails and engine bays. Each clamp uses a 6.4 mm fixing hole so you can bolt it down with common hardware on utes, trailers or canopy builds. The EPDM liner grips the cable and handles temperatures from -35°C to 100°C, so you can get out there without chasing loose wiring after a corrugated run.

The band is Grade W3 stainless at 15 mm width, giving good contact area and corrosion resistance in coastal air or wet tracks. Softened band edges and reinforced tips cut down on sharp spots around your hands and cable sheaths. The ten clamp pack suits small jobs or tidy upgrades on existing setups. It is a smart buy for anyone tidying 12V wiring from the bush to the beach.

• 15mm band width stainless steel cable clamp
• Single 6.4mm mounting hole on each ear
• Grade W3 stainless band for corrosion resistance
• EPDM rubber liner protects cable insulation
• Softened band edges reduce abrasion on looms
• Reinforced band tips improve handling and safety
• Operating temperature range from -35°C to 100°C
• Supplied as a convenient 10 piece pack
• Suits securing small cables and compact looms
• Ideal for automotive, trailer and general wiring management

Q: What size bolt or screw suits the 6.4mm hole?

A fixing with a shank around 6mm suits the 6.4mm hole. This lets the clamp pivot slightly as you line up the cable run. Stainless or zinc-plated hardware matches the corrosion resistant band. Always match the fastener length to the bracket thickness so the clamp sits firm without crushing the cable.

Q: Can these clamps be used near the engine bay?

Yes, they can be used within the -35°C to 100°C range. The EPDM rubber and stainless band handle typical under‑bonnet temperatures within that window. Avoid mounting directly on exhaust components where temperatures exceed 100°C. Check the cable jacket rating matches the same range for a consistent setup.

Q: Are these clamps suitable for outdoor trailer wiring?

Yes, the stainless steel and EPDM materials suit exposed trailer wiring. Corrosion resistance helps against road spray and wet conditions. The softened edges reduce damage where the loom moves slightly. Regularly check the hardware for tightness after rough tracks.

Q: What cable diameter works best with a 15mm band width clamp?

These clamps suit small single cables or compact looms that sit neatly within the 15mm band width. Always test fit with your actual cable bundle before final mounting. The EPDM liner compresses slightly to grip the jacket. Do not over-tighten the clamp as that can flatten softer insulation.