This LV Automotive 13mm cable clamp keeps 13 mm looms and hoses tucked neatly along panels, chassis rails or canopy frames. The 15 mm wide strap wraps around the cable and bolts back to any tab or bracket with a 6.4 mm hole, so you can line up a tidy run along your boat, ute tray or trailer drawbar. With a pack of 10, you can lock down a full length of wiring in one hit.

The band is mild steel and the liner is EPDM rubber, so the gear bites on the cable but still cushions the insulation on rough tracks or corrugated roads. The 15 mm width gives each clamp a solid contact patch without eating up space on a narrow rail. Match the 6.4 mm hole with standard M6 hardware and you have simple, proven hardware that is a smart buy for everyday electrical work.

• Internal clamp diameter: 13mm
• Strap width measures 15mm
• Mounting hole size: 6.4mm
• EPDM rubber lining protects cable jackets
• Mild steel band provides firm mechanical support
• Suitable for securing electrical wiring and small hoses
• Pack contains 10 identical cable clamps
• Compatible with common M6 mounting hardware
• Suits marine, automotive and general wiring layouts
• Compact design for tight panel and chassis spaces

Q: What cable size suits this 13mm clamp?

This clamp suits cables or looms around 13mm outside diameter. That includes single heavy cables or small bundles that measure close to 13mm across. If the cable is much smaller it may not grip firmly. For thicker looms you will need the next size up.

Q: What bolt size fits the 6.4mm mounting hole?

The 6.4mm mounting hole is suited to standard M6 bolts or screws. M6 hardware gives a solid hold for automotive and marine panels. Use flat washers if mounting to softer materials. Always tighten to suit the panel strength.

Q: Can I use these clamps around engine bays?

These clamps use a mild steel band with an EPDM rubber lining, which is commonly used in automotive areas. They are fine for general wiring support near engines when secured to suitable brackets. Avoid direct contact with extreme heat sources such as exhaust components.

Q: How many clamps are in one pack?

Each pack contains 10 individual 13mm cable clamps. This quantity works well for securing several short wiring runs along a trailer or canopy. If you are planning a full vehicle rewire you may need multiple packs. Buy a little extra so your cable spacing stays consistent.