The Boab 12mm Hose Kit suit BOAB Tanks hooks straight to your BOAB tank so you can get water where you need it within a reach of about 1.5m. The 12mm bore keeps flow consistent from the tank outlet to your bucket or sink without needing extra adaptors. The tap at the hose end gives you simple on and off control so you are not wasting water on longer stays. The clear hose sits at 12mm internal diameter and 1.5m length, which works well around ute trays, canopies, and wagons in typical Aussie touring setups. The clamps bite onto the hose and fitting to keep it in place when the track gets corrugated. The compact tap body handles regular camp use around dust, grit, and splash. The whole kit stays small enough to coil and stash in a drawer or tub, which makes it a smart buy for space conscious rigs.

• Suits BOAB water tanks with 12mm outlet
• Includes 12mm internal diameter clear hose
• Hose length supplied at 1.5m
• Tap fitted at hose outlet for control
• Supplied with clamps for secure joints
• Compact coil stores easily in canopies
• Clear hose lets you see water flow
• Simple kit for basic water transfer
• Compatible with touring and camping setups
• Ideal for rear bar or tray water access

Q: Does this hose kit include the tap and clamps?

Yes, the kit includes a tap and clamps. The tap is fitted at the hose end so you can control flow at the point of use. The clamps are supplied to secure the hose to the tap assembly and compatible BOAB tank outlet. This keeps the setup tidy around your rear bar or canopy and limits leaks at the joins.

Q: What hose size fittings does this kit suit?

This kit suits 12mm hose connections. The hose itself has a 12mm internal diameter, so it mates with BOAB tanks that use the same size outlet. Matching the hose size to the outlet helps maintain flow and reduces the chance of poor sealing. Always check your tank outlet size before ordering more hose or fittings.

Q: Is the 1.5m hose length fixed or can it be extended?

The supplied hose length is 1.5m. You can shorten it by cutting if your setup is very compact, then refit the clamp. To extend beyond 1.5m you would need additional compatible 12mm hose and joiners from your own kit. Extra joins may reduce flow and add more potential leak points.

Q: Can this kit be moved between different BOAB tanks?

Yes, as long as the tanks share the same 12mm outlet size. The hose and tap assembly are not permanently bonded to a single tank. You can undo the clamp and shift the kit from one BOAB tank to another. This can be handy if you rotate tanks between different vehicles or trailers.

This 12mm hose kit suits BOAB water tanks that accept a 12mm hose connection. Installation uses the supplied clamps to secure the hose to the tank outlet and tap assembly. No additional fittings are specified as required beyond the compatible BOAB tank with the correct outlet size.