This LV Automotive 12 Pin Flat Trailer Plug gives you 12 channels for lights brakes and auxiliary circuits in one flat connector so you can tow with standard wiring layouts. The nickel plated terminals keep contact steady on 12 V setups when you are hauling the camper or box trailer down 110 km/h highway runs or slow tracks. The body size around 60–80 mm sits neatly near the towbar without hanging too low.

The plug shell uses durable plastic with stainless steel screws at 2–4 mounting points so it holds together after weekend trips and long tours. The nickel plated pins cope with spray dust and temperature swings from about -10°C to typical Aussie summer heat without heavy corrosion. The cable entry suits common trailer cable around 8–12 mm diameter so you can match it to standard looms. For the price this is smart buy wiring gear that is made to last.

• 12 pin flat trailer plug configuration
• Suits multi-circuit trailer and caravan wiring
• Nickel plated terminals for improved conductivity
• Stainless steel screws resist corrosion
• Durable plastic body for impact resistance
• Straight rear cable entry with strain relief
• Compatible with standard 12 V trailer systems
• Ideal for new installs or plug replacement
• Single plug supplied per pack (each)
• LV Automotive branded electrical connector

Q: Is this plug supplied as a single unit or a pair?

This plug is supplied as a single 12 pin flat trailer plug. You can use it to replace a damaged plug on an existing loom or for a new wiring job. If you need a matching socket you will need to purchase that separately. Many customers keep a spare plug in the toolbox for roadside repairs.

Q: What tools are needed to fit the 12 pin flat plug?

Basic hand tools are usually enough for fitting this plug. A small screwdriver is required to tighten the stainless steel screws onto the conductors. A sharp knife or wire stripper is useful for preparing the cable. A simple test light or multimeter helps you confirm each of the 12 circuits before towing.

Q: Can this plug be used outdoors on the towbar area full time?

Yes this plug is intended for use at the towbar where it is exposed to weather. The plastic body and nickel plated terminals are suitable for typical outdoor use on tow vehicles and trailers. Regular checks and cleaning of the contact faces will help maintain good electrical connection. Using a cover or holder when not towing will further reduce dirt build-up.

Q: Is this plug suitable for both caravans and small box trailers?

This 12 pin flat plug can be used on caravans camper trailers and box trailers that use the 12 pin flat wiring pattern. The extra pins above a standard 7 pin setup allow circuits like fridge feed or battery charge. Always match the plug wiring to the socket on your tow vehicle. If your vehicle only has a 7 pin socket you may require an adaptor.