The Upper chassis mount on the Toyota 80/105 Series LandCruisers may have been of sufficient strength back in the day, but with many years and constant hard knocks from our less-than-perfect roads can fatigue the steel causing a potential for failure.
This Weld In Panhard Brace is the perfect solution to strengthen the chassis end panhard mount which may have become weakened over time.
Supplied raw, ready to weld with full instructions and fitting kit.
NOTE: This kit is only suitable for Late Model LC80 Series and all LC105 Series Landcruisers.
To help identify whether your vehicle has the correct chassis or not for this kit, please refer to the below image.
The key identifying feature is the circular hole, located forward of the steering box itself.
If you have any questions, please contact our sales team.
- Braces front panhard chassis mount
- Ideal for lifted touring LandCruisers
- Raw steel plates made to weld
- Hardware kit keeps setup simple
- Built tough for Aussie corrugations
- Smart buy to prevent mount failure
- Application: front panhard chassis mount brace
- Vehicle compatibility: Toyota LandCruiser 80 Series late model
- Vehicle compatibility: Toyota LandCruiser 105 Series
- Location: upper chassis end panhard mount
- Supplied finish: raw steel ready to weld
- Installation type: weld-on with supplied hardware
- Intended use: strengthening fatigued chassis panhard mount
- Weld-in front panhard brace plates
- Weld-on gusset plates
- 4 mounting bolts
- 4 matching nyloc nuts
- Installation and welding instructions
- Fitting hardware kit
| SKU | SE-47136 |
|---|---|
| Barcode # | 930000047136 |
| Brand | Superior Engineering |
| Shipping Weight | 2.6800kg |
| Shipping Width | 0.220m |
| Shipping Height | 0.130m |
| Shipping Length | 0.310m |
More infoMake 4 payments of $35.00 over 8 weeks and get it now!
Calculate Shipping
The Upper chassis mount on the Toyota 80/105 Series LandCruisers may have been of sufficient strength back in the day, but with many years and constant hard knocks from our less-than-perfect roads can fatigue the steel causing a potential for failure.
This Weld In Panhard Brace is the perfect solution to strengthen the chassis end panhard mount which may have become weakened over time.
Supplied raw, ready to weld with full instructions and fitting kit.
NOTE: This kit is only suitable for Late Model LC80 Series and all LC105 Series Landcruisers.
To help identify whether your vehicle has the correct chassis or not for this kit, please refer to the below image.
The key identifying feature is the circular hole, located forward of the steering box itself.
If you have any questions, please contact our sales team.
- Braces front panhard chassis mount
- Ideal for lifted touring LandCruisers
- Raw steel plates made to weld
- Hardware kit keeps setup simple
- Built tough for Aussie corrugations
- Smart buy to prevent mount failure
- Application: front panhard chassis mount brace
- Vehicle compatibility: Toyota LandCruiser 80 Series late model
- Vehicle compatibility: Toyota LandCruiser 105 Series
- Location: upper chassis end panhard mount
- Supplied finish: raw steel ready to weld
- Installation type: weld-on with supplied hardware
- Intended use: strengthening fatigued chassis panhard mount
- Weld-in front panhard brace plates
- Weld-on gusset plates
- 4 mounting bolts
- 4 matching nyloc nuts
- Installation and welding instructions
- Fitting hardware kit
| SKU | SE-47136 |
|---|---|
| Barcode # | 930000047136 |
| Brand | Superior Engineering |
| Shipping Weight | 2.6800kg |
| Shipping Width | 0.220m |
| Shipping Height | 0.130m |
| Shipping Length | 0.310m |
