The Aravon Shower Head Only runs ON, OFF and CONTINUOUS flow through a standard 1/2" BSP male connection so it drops straight into most marine shower setups. You get clear trigger control that suits short rinses in a small head or caravan ensuite where water tanks sit under 200 litres. The compact body works well in tight corners and keeps hose twist under control when boat or van space is already crowded. This shower head is Italian made with a 1/2" BSP male thread machined to standard pitch for common marine fittings. The lightweight housing works well with flexible 1/2" hoses and modest flow from typical 12V diaphragm pumps. The plastic body shrugs off normal bathroom moisture and regular saltwater splashes when used near beach moorings. If you want straightforward kit for a basic marine bathroom refit this is a smart buy.

• Shower head only replacement component
• ON / OFF / CONTINUOUS flow control trigger
• 1/2" BSP male threaded connection
• Compatible with standard marine plumbing hoses
• Suitable for caravan and boat shower setups
• Lightweight plastic body for compact bathrooms
• Italian made manufacturing quality
• Part number 51010 for easy matching
• Ideal for bathroom and shower fitting upgrades
• Simple design for straightforward daily use

Q: Does this shower head include the hose and bracket?

No, this kit is the shower head only. That means you reuse an existing 1/2" hose that already matches your setup. You can pair it with a separate wall bracket that suits the body shape. This keeps the replacement cost down if your old head has failed but the rest of the gear is still fine.

Q: Will the 1/2" BSP male thread suit standard marine plumbing?

Yes, the head uses a 1/2" BSP male thread that matches common marine and caravan fittings. Most shower hoses and mixer outlets in these setups run the same size. Always check your current hose has a 1/2" BSP female nut before ordering. If it does, this head will screw straight on with thread tape or an appropriate washer.

Q: Is the shower head suitable for use with 12V pump systems?

Yes, this head works well with typical 12V diaphragm pump systems found in boats and caravans. The ON and OFF positions help you control flow from small tanks. The CONTINUOUS position lets the pump cycle normally during longer rinses. As always, make sure your pump and plumbing are rated for your water pressure.

Q: Can I use this in a home bathroom instead of a marine setup?

It can fit any system that uses a 1/2" BSP female hose connection. Many domestic hand showers use the same standard size. Check that your existing hose unscrews from the old head and exposes a 1/2" BSP female thread. If it does, this shower head can be used in that installation.