The Camec Waste Kit for 45mm sink holes keeps grey water moving through a 90 degree outlet and 1 inch barb so you can hook it straight into your usual hose. The plug drops into the 45mm opening to hold water while you scrub dishes or rinse gear. The compact body suits tight caravan cupboards where space is usually down to a couple of hundred millimetres.
The plastic body handles everyday dishwater and soap without rust or swelling so it is a smart buy for busy touring setups. The 1 inch barb pairs with common hose found in most Aussie camps so you can tackle repairs or replacements without hunting odd sizes. The 90 degree outlet helps the waste line hug the cabinet wall and stay clear of drawers and storage tubs so the rest of your kit still fits.
- Camec waste kit for 45mm sink holes
- Suits caravan and RV sink installations
- 90 degree outlet for low under-sink profile
- 1 inch barb connection for waste hose
- Plastic body for corrosion resistance
- Includes plug for holding water in sink
- Includes sealing ring for around waste opening
- Includes fixing screw for securing to sink
- White finish to match common caravan fittings
- Compact design helps maximise cupboard space
Q: Will this Camec waste kit fit any sink with a 45mm hole?
It fits sinks that have a true 45mm waste opening. Measure the cut-out across the centre to confirm it is 45mm before ordering. If the hole is larger or smaller the flange may not seal correctly. Matching the size avoids leaks and keeps the plug seating properly.
Q: What hose should I use with the 1 inch barb outlet?
Use flexible hose with a 1 inch internal diameter. This size will slide over the barb and clamp down firmly. Undersized hose can be hard to push on and may stress the plastic. Oversized hose may not seal and can leak when the sink drains.
Q: Is the plastic body suitable for hot water from a caravan sink?
It is fine for normal hand and dish washing temperatures. Very hot water straight from a kettle can soften plastic parts over time. Let boiling water cool slightly or mix with cold before pouring. That keeps the kit working well on longer trips.
Q: Can I use this waste kit in a shower tray instead of a sink?
It is intended for sink applications rather than floor trays. Shower trays often need lower profiles and different grate designs. Using it in the sink position keeps hair and food scraps where you can reach the plug. That makes cleaning and basic maintenance much simpler.
This waste kit suits sinks with a 45 mm drain hole. The 1 inch barb outlet connects to compatible flexible hose commonly used in caravan and RV plumbing. The 90 degree outlet helps route waste lines in tight under-sink spaces. Installation uses the supplied fixing screw and sealing ring onto the sink drain opening.
- Compact waste kit for 45mm sinks
- 90 degree outlet clears cupboard gear
- 1 inch barb suits common hoses
- Plastic build made to go the distance
- Straightforward setup for touring rigs
- Brand: Camec
- Product type: waste kit
- Sink hole compatibility: 45 mm
- Outlet style: 90 degree
- Outlet connection: 1 inch barb
- Material: plastic
- Colour: white
- 1 x plastic waste body with 90 degree outlet
- 1 x rubber plug
- 1 x sealing ring
- 1 x fixing screw
| SKU | 042871-A |
|---|---|
| Barcode # | 042871-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
More info
The Camec Waste Kit for 45mm sink holes keeps grey water moving through a 90 degree outlet and 1 inch barb so you can hook it straight into your usual hose. The plug drops into the 45mm opening to hold water while you scrub dishes or rinse gear. The compact body suits tight caravan cupboards where space is usually down to a couple of hundred millimetres.
The plastic body handles everyday dishwater and soap without rust or swelling so it is a smart buy for busy touring setups. The 1 inch barb pairs with common hose found in most Aussie camps so you can tackle repairs or replacements without hunting odd sizes. The 90 degree outlet helps the waste line hug the cabinet wall and stay clear of drawers and storage tubs so the rest of your kit still fits.
- Camec waste kit for 45mm sink holes
- Suits caravan and RV sink installations
- 90 degree outlet for low under-sink profile
- 1 inch barb connection for waste hose
- Plastic body for corrosion resistance
- Includes plug for holding water in sink
- Includes sealing ring for around waste opening
- Includes fixing screw for securing to sink
- White finish to match common caravan fittings
- Compact design helps maximise cupboard space
Q: Will this Camec waste kit fit any sink with a 45mm hole?
It fits sinks that have a true 45mm waste opening. Measure the cut-out across the centre to confirm it is 45mm before ordering. If the hole is larger or smaller the flange may not seal correctly. Matching the size avoids leaks and keeps the plug seating properly.
Q: What hose should I use with the 1 inch barb outlet?
Use flexible hose with a 1 inch internal diameter. This size will slide over the barb and clamp down firmly. Undersized hose can be hard to push on and may stress the plastic. Oversized hose may not seal and can leak when the sink drains.
Q: Is the plastic body suitable for hot water from a caravan sink?
It is fine for normal hand and dish washing temperatures. Very hot water straight from a kettle can soften plastic parts over time. Let boiling water cool slightly or mix with cold before pouring. That keeps the kit working well on longer trips.
Q: Can I use this waste kit in a shower tray instead of a sink?
It is intended for sink applications rather than floor trays. Shower trays often need lower profiles and different grate designs. Using it in the sink position keeps hair and food scraps where you can reach the plug. That makes cleaning and basic maintenance much simpler.
This waste kit suits sinks with a 45 mm drain hole. The 1 inch barb outlet connects to compatible flexible hose commonly used in caravan and RV plumbing. The 90 degree outlet helps route waste lines in tight under-sink spaces. Installation uses the supplied fixing screw and sealing ring onto the sink drain opening.
- Compact waste kit for 45mm sinks
- 90 degree outlet clears cupboard gear
- 1 inch barb suits common hoses
- Plastic build made to go the distance
- Straightforward setup for touring rigs
- Brand: Camec
- Product type: waste kit
- Sink hole compatibility: 45 mm
- Outlet style: 90 degree
- Outlet connection: 1 inch barb
- Material: plastic
- Colour: white
- 1 x plastic waste body with 90 degree outlet
- 1 x rubber plug
- 1 x sealing ring
- 1 x fixing screw
| SKU | 042871-A |
|---|---|
| Barcode # | 042871-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
