We now do 4x4 accessory fitting! Contact Us for a quote.
The "Boss" series winch is the perfect choice for 4WD enthusiasts who want the very best. They are designed not only to look tough but provide fault free operation under the toughest of Australian conditions.
Each winch in the BOSS series features a three stage planetary gearbox with BS 1/2 H2600 sintered bronze bushings and S45C hardened carbon steel gears, providing superior strength even when working under the toughest of conditions. These bushings have been pressed and stamped (no pop rivets) into the gear carrier. A sliding ring gear clutch provides maximum strength and efficiency in forward and reverse winching operations with ease of free spool functionality.
Each gear box is assembled and lubricated using synthetic grease and conforms to our strict assembly guidelines. Providing strength and enduring the pulling forces exerted is a hardened seamless steel drum assembly. The in-drum brake system features automatic direct drive load holding and Kevlar brake pads for improved safety.
The features listed will assure you of quality and reliability when putting your 4x4 to the test.
Please Note: When selecting a winch you should always select one that is 1.5 times the Gross Vehicle Mass (GVM).
EB9500 – Fitted with 5.56mm x 12m galvanised aircraft cable which has high abrasive capabilities that will give you confidence from daily wear and tear.
EB9500B – Comes bare with the option to allow you to fit your own wire cable or synthetic rope.
EB9500S – Fitted with Synthetic Rope (10mm x 28m). Dyneema is a safer and lighter option than wire cable, and is regarded as the ultimate in performance.
What's In the Box?
- Winch with laser engraved Serial Number
- Control Box - Hand Control with storage bag
- Tinned Copper Power Cable kit with Fibreglass Sheath Protection
- Alloy Fairlead
- 3/8" Clevis Hook
- Hand Saver Hook Strap
- Detailed Instruction Manual
- Warranty registration Card
- Winch and Fairlead Mounting Hardware (Bolts, Washer and Nuts)
- Side mounting Kit for control box
- Extra long control box mounting bolts
- Spare Gearbox gasket
Clevis hook | 3/8€³ |
Motor Type | Series Wound |
Overall Dimensions | 554mm x 170mm x 190mm (27.82" x 6.7" x 7.5") |
Recommended Battery | Minimum 650CCA |
Motor | 4.6 Hp, 3.43 Kw |
Motor Power Cables | 3 x 450mm x 25mm², Tinned Copper with Sheath Protection |
Clutch | Sliding Ring Gear |
Control | Hand Control, 5m lead |
Specification | 9500lb (4309kg) - Boss Series |
Battery Power Cables | 2 x 1900mm x 25mm², Tinned Copper with Sheath Protection |
voltage | 12 Volt |
Mounting Bolt Pattern | 254mm x 114.3mm (10" x 4.5") |
Net weight | 31kg |
Gear Ratio | 166:01:00 |
Gear Tran | 3 Stage Planetary |
Braking | Automatic Direct Drive Load Holding |
Drum | Hardened Seamless Steel 63mm x 228mm(2.45€³ x 9€³) |
SKU | EB9500-B-S |
---|---|
Brand | Mean Mother |
Shipping Weight | 30.0000kg |
Shipping Width | 0.500m |
Shipping Height | 0.400m |
Shipping Length | 0.500m |