This Jayrad JR8010J radiator runs a core at 500 mm high and 600 mm wide so it lines up with Pajero NJ NK NL front openings without drama. The 42 mm thickness gives the core enough volume to keep 2.8 diesel and 3.0 or 3.5 V6 engines steady on long climbs or sand tracks. The 35 mm inlet and outlet match factory hoses so you keep the existing plumbing on your touring rig. This radiator ties back to J32CM MIT006CMK and RA166 numbers so you can double check it against your old unit before you rip it out. The built in transmission cooler section suits driveline setups that rely on the radiator tank for oil temperature control. The 500 x 600 mm core size works well when the Pajero is loaded for a trip across hot bitumen. The 42 mm thickness helps the cooling system tackle slow low range work without heat soak.

• Jayrad JR8010J radiator for Mitsubishi Pajero NJ NK NL
• Suits 2.8L diesel plus 3.0L and 3.5L V6 engines
• Core height approximately 500 mm
• Core width approximately 600 mm
• Core thickness approximately 42 mm
• Inlet hose diameter 35 mm
• Outlet hose diameter 35 mm
• Includes integrated transmission cooler section
• Cross-references J32CM MIT006CMK and RA166
• Suitable for manual transmission Pajero models from 1994 onwards

Q: Will this radiator fit all Mitsubishi Pajero NJ NK NL models with manual transmission?

It is specified for NJ NK NL Pajero models with manual gearboxes from 1994 onward. Check your build year and engine code against 2.8L diesel or 3.0L and 3.5L V6 listings. Measure your existing core at roughly 500 mm high and 600 mm wide. Matching these details is the safest way to confirm you have the right gear.

Q: What hose size does this Jayrad radiator use?

Both inlet and outlet necks are 35 mm in diameter. This matches the listed 35 mm hose size and keeps your existing plumbing compatible. Always compare the neck size on your old unit with this measurement. A quick check with a ruler or vernier caliper avoids mix ups during the swap.

Q: Does this radiator include a built-in transmission cooler?

Yes this radiator includes a transmission cooler section. The cooler runs inside the tank to manage transmission oil temperature. Always reconnect the original transmission lines to the correct fittings. After installation check for leaks around the cooler ports once the gearbox reaches operating temperature.

Q: How can I confirm this radiator against other part numbers?

This unit cross references to J32CM MIT006CMK and RA166. If your existing radiator or workshop notes list any of those codes this model should match. You can also confirm by checking the 500 mm height and 600 mm width plus 42 mm thickness. Using both dimensions and part codes gives strong confidence in the fit.

Suitable for Mitsubishi Pajero NJ, NK, NL models with manual transmission from 1994 onwards running 2.8L diesel or 3.0L and 3.5L V6 engines. Cross-reference part numbers include J32CM, MIT006CMK and RA166. Professional installation is recommended to ensure correct coolant hose routing and transmission cooler line connection where applicable. Always confirm core dimensions of 500 mm height, 600 mm width and 42 mm thickness against the existing radiator before fitment.